Air Compressor Controllers

Arya Electronics offers end to end embedded solutions to its customers that entail all stages of product life cycle. Arya has functioned on tasks that contain conceptualisation, requirement engineering, system architecture strategy, hardware and firmware design and advance verification, validation and support engineering and in house assembly component where we can execute low volume high mix and high volume low mix production.

Arya Electronics designs and manufactures control products for various applications of AMF Controllers, Compressor controller and air compressor controller, along with associated accessories and software. One of the best diesel generator monitoring systems India.

Air Compressor Controller is a machine which compresses the air and raises its pressure. It sucks the air from the surrounding atmosphere, compresses it, and deliver it to a storage tank under high pressure. From the storage vessel, air compressor controller may be conveyed by the pipeline to a place where the supply of compressed air is needed. Since air compressor controller required some work to be done on it, the compressor must be driven by some prime mover.

• Microprocessor based design
• Manual Blower start and stop
• 3.5” TFT Display Non touch
• HMI keypad & indications
• Analog inputs – 12 Nos
• Proximity Sw Inputs – 2 Nos.
• Digital Inputs – 6 Nos.
• Digital Outputs – 8 Nos.
• RTC
• RS485 Port
• Datalogging (SD Card)

Power Supply:
• 24V DC (SMPS)

Environmental Specifications:
• Operating Temperature: 0 – 50ºC
• Protection Class – NA

Over All Dimensions: (For Controller)
• 180mm x 130mm x 60mm

• Shutdown
• Service
• Automatic
• Power

• Start
• Stop / Reset
• UP
• Down
• Decrement (-)
• Increment (+)
• Left
• Right
• Enter

• 4-20mA (2 Wires – 6 Nos)
• Pulse Input ( RPM Sensor)
• RTD – (3 wires – 5 Nos.)
• Proximity Switch LO 1
• Proximity Switch LO 2
• Spare Input – 6 Nos.

• Main Motor Start
• Fan Motor Start Common Alarm
• Common Trip
• Spare output – 4 Nos

• As Per Customer Specifications.

Cut out Dimension:

Overall Dimensions

PIN 1: 24V +VE

PIN 2: GND

PIN 3: DI -1

PIN 4: REMOTE STOP

PIN 5: REMOTE START

PIN 6: MAIN MOT RUN FB                                                 

PIN 7: BL MOTOR RUN O/L

PIN 8: E. STOP

PIN 9: LO1

PIN 10: LO2

PIN 11: GND

PIN 12: 24V +VE

PIN 1: NB (Proximity pulse)

PIN 2: NB (Proximity pulse)

PIN 3: NB (Proximity pulse)

PIN 4: 24V +VE (4-20mA Supply)

PIN 5: VMND (4-20mA)

PIN 6: VMD (4-20mA)

PIN 7: VBG (4-20mA)

PIN 8: VBD (4-20mA)

PIN 9: P2 (4-20mA)

PIN 10: P1 (4-20mA)

PIN 1: DO – 4

PIN 2: DO – 3

PIN 3: DO – 2

PIN 4: DO – 1

PIN 5: COMMON TRIP

PIN 6: COMMON ALARM

PIN 7: FAN MOTOR START

PIN 8: MAIN MOTOR START

PIN-9: GND

PIN 1: T1-1

PIN 2: T1-2

PIN 3: T1-3

PIN 4: T2-1

PIN 5: T2-2

PIN 6: T2-3

PIN 7: T3-1

PIN 8: T3-2

PIN 9: T3-3

PIN 10: T4-1

PIN 11: T4-2

PIN 12: T4-3

PIN 13: T5-1

PIN 14: T5-2

PIN 15: T5-3

PIN 1: RS485 A

PIN 2: RS485 B

PIN 3: RS485 GND

1. Air compressor controller is used to drive air motors in coal mine and jet engine.
2. Air compressor controller is used to supply air blast in Bessemer converter and blast furnace.
3. It is used to operate poeumatic drill, hammer, riveters, paint spraying, sand blaster.
4. It is used to operate air brake for locomotive and railway carriages.
5. Air compressor controller is used for supercharging of IC Engines.
6. To clean machines and floor.
7. To cool large buildings and air crafts.